Network Administrator with Cisco devices, Syncsort, ZCM, VMware, virtual server, OES2, NDS, Windows server install, DR, AD Domain Controller, HP EVA, and government experienceLocation: St. Paul MN
Duration: 4-5 months
Positions: 1Required Skills:
A CNE or equivalent;
Minimum of 10 years of experience as a senior network engineer;
Minimum of 5 years of experience installing and working with Cisco equipment such as Cisco ASA5510, Cisco Catalyst switch, and Cisco PIX;
Minimum of 3 years of experience installing and working with Syncsort Backup software;
Minimum of 5 years of experience migrating between versions of ZCM;
Minimum of 5 years of experience installing and working with VMware ESX ;
Minimum of 5 years of experience working with ZCM Patch Management; and
Minimum of 5 years of experience upgrading virtual serversContractor’s Duties
a. OES2 Cluster Migration - Install new OES2 cluster and migrate, convert, or transfer a 3 node Netware 6.5 SP8 cluster to an OES2 cluster.
i. Validate the current cluster design and make recommendations for changes, if necessary.
ii. Configure the HP Integrated Lights-out (iLO) remote management interface.
iii. Install and configure the most current version of OES2 and apply any necessary patches.
iv. Migrate from the Netware 6.5 cluster to the OES2 cluster.
v. Transfer data and file system rights to the new cluster.
vi. Rezone LUNs (logical unit number) on the existing HP SAN (storage area network).
vii. Ensure that each cluster resource is able to online, offline, and migrate between all cluster nodes in the cluster. b. NDS Master Server Replacement - Replace the current server named “osabackup” which is running Netware 6.5 SP8 with new hardware running the latest version of OES2.
i. Install and configure latest version of OES2 and apply any necessary patches.
ii. Install and configure DNS (domain name system).
iii. Install and configure DHCP (dynamic host configuration protocol).
iv. Install and configure FreeRADIUS.
v. Install and configure NTP (network time protocol).
vi. Migrate or transfer the NDS Master Replica's, DNS, DHCP and Radius services to new server.
vii. Maintain the same IP address for the DNS, NTP and FreeRADIUS servers.
viii. Configure the iLO remote management interface.c. VMware Virtual Center Server Replacement – Replace the current VMware Virtual Center server with new hardware.
i. Install and configure a new VMware Virtual Center Server 2008.
ii. Retire the existing server and move its functions to the new server.
iii. Install and configure VMware vCenter and HP EVA Command View.
iv. Validate that all components will function.
v. Zone and configure the fiber channel to the respective zones.
vi. Install Microsoft Windows Server 2008 R2 and any necessary patches.
vii. Install VMware Virtual Center Server.
viii. Install Microsoft SQL Server 2008.
ix. Configure the iLO remote management interface. d. Web Server Review - Review configuration of recently replaced web server and make any necessary changes so that it is consistent with how other servers are configured.
i. Coordinate review and implementation of any changes with Web Administrator.
ii. Review configuration of Syncsort Backup Express software and reconfigure, if necessary.
iii. Review configuration of Symantec Antivirus and reconfigure, if necessary.
iv. Review configuration of the iLO remote management interface and reconfigure, if necessary.
v. Generally, review configuration of server and make modifications to configuration, if necessary. e. Network Management Server Replacement – Replace the current server named “MGMT” which is used for general network management tasks with new hardware running Microsoft Server 2008 R2.
i. Install and configure Windows Server 2008 R2and apply any necessary patches.
ii. Install and configure the following applications.
1. Scheduled Robocopy online backup scripts from current server.
2. Novell ConsoleOne
3. PuTTY
4. WinSCP.
5. Syncsort Backup Express
6. DNS and DHCP Management Consoles
7. HP Insight Manager.
8. Other various utilities as installed on current server.
iii. Configure the iLO remote management interface. f. DR Server Disk Expansion – Add and configure an expansion cabinet and additional drives to server located at the Minneapolis field office.
i. Add a disk expansion cabinet.
ii. Add and configure additional disks.
iii. Expand or move existing virtual server to new disk space.
iv. Configure the iLO remote management interface.
v. Install and configure disk expansion for existing DR server on VMware ESX server.
vi. Partition and format storage for VMware ESX server.
vii. Transfer existing virtual machines to larger storage partitions. g. AD Domain Controller Installation – Add and configure second AD Domain Controller.
i. Install and configure Windows 2008 R2 apply any necessary patches.
ii. Install and configure a second AD Domain Controller.
iii. Implement roles and features as necessary to mirror existing AD Domain Controller.
iv. Install and configure DNS services.
v. Configure the iLO remote management interface.
vi. Configure and implement other services as determined in planning.h. VMware ESX Server Replacement – Replace the existing VMware ESX servers with new hardware.
i. Create an implementation plan for replacing existing VMware ESX servers.
ii. Install and configure new servers.
iii. Install, configure and patch VMware ESX / v sphere server.
iv. Configure the iLO remote management interface.
v. Coordinate the replacement of existing servers with newly configured servers.i. HP EVA Upgrade- Install additional disk drives and upgrade disk pool and software on current HP EVA.
i. Expand the EVA disk pool with new disk drives.
ii. Review and update all software as necessary.
iii. Review and upgrade all firmware as necessary.
iv. Install new disk drives and expand of the disk pool on the HP EVA.j. Novell ZCM Patch Management Implementation – Implement ZCM Patch Management for new hardware and virtual machines.
i. Configure ZCM Patch Management to work with new hardware and virtual machines.k. Novell ZCM Upgrade – Upgrade Novell ZCM 10.x to latest version.
i. Perform upgrade of Novell ZCM to latest version. l. General Support.
i. Provide up to 80 hours of support for network and connected equipment.
Duration: 4-5 months
Positions: 1Required Skills:
A CNE or equivalent;
Minimum of 10 years of experience as a senior network engineer;
Minimum of 5 years of experience installing and working with Cisco equipment such as Cisco ASA5510, Cisco Catalyst switch, and Cisco PIX;
Minimum of 3 years of experience installing and working with Syncsort Backup software;
Minimum of 5 years of experience migrating between versions of ZCM;
Minimum of 5 years of experience installing and working with VMware ESX ;
Minimum of 5 years of experience working with ZCM Patch Management; and
Minimum of 5 years of experience upgrading virtual serversContractor’s Duties
a. OES2 Cluster Migration - Install new OES2 cluster and migrate, convert, or transfer a 3 node Netware 6.5 SP8 cluster to an OES2 cluster.
i. Validate the current cluster design and make recommendations for changes, if necessary.
ii. Configure the HP Integrated Lights-out (iLO) remote management interface.
iii. Install and configure the most current version of OES2 and apply any necessary patches.
iv. Migrate from the Netware 6.5 cluster to the OES2 cluster.
v. Transfer data and file system rights to the new cluster.
vi. Rezone LUNs (logical unit number) on the existing HP SAN (storage area network).
vii. Ensure that each cluster resource is able to online, offline, and migrate between all cluster nodes in the cluster. b. NDS Master Server Replacement - Replace the current server named “osabackup” which is running Netware 6.5 SP8 with new hardware running the latest version of OES2.
i. Install and configure latest version of OES2 and apply any necessary patches.
ii. Install and configure DNS (domain name system).
iii. Install and configure DHCP (dynamic host configuration protocol).
iv. Install and configure FreeRADIUS.
v. Install and configure NTP (network time protocol).
vi. Migrate or transfer the NDS Master Replica's, DNS, DHCP and Radius services to new server.
vii. Maintain the same IP address for the DNS, NTP and FreeRADIUS servers.
viii. Configure the iLO remote management interface.c. VMware Virtual Center Server Replacement – Replace the current VMware Virtual Center server with new hardware.
i. Install and configure a new VMware Virtual Center Server 2008.
ii. Retire the existing server and move its functions to the new server.
iii. Install and configure VMware vCenter and HP EVA Command View.
iv. Validate that all components will function.
v. Zone and configure the fiber channel to the respective zones.
vi. Install Microsoft Windows Server 2008 R2 and any necessary patches.
vii. Install VMware Virtual Center Server.
viii. Install Microsoft SQL Server 2008.
ix. Configure the iLO remote management interface. d. Web Server Review - Review configuration of recently replaced web server and make any necessary changes so that it is consistent with how other servers are configured.
i. Coordinate review and implementation of any changes with Web Administrator.
ii. Review configuration of Syncsort Backup Express software and reconfigure, if necessary.
iii. Review configuration of Symantec Antivirus and reconfigure, if necessary.
iv. Review configuration of the iLO remote management interface and reconfigure, if necessary.
v. Generally, review configuration of server and make modifications to configuration, if necessary. e. Network Management Server Replacement – Replace the current server named “MGMT” which is used for general network management tasks with new hardware running Microsoft Server 2008 R2.
i. Install and configure Windows Server 2008 R2and apply any necessary patches.
ii. Install and configure the following applications.
1. Scheduled Robocopy online backup scripts from current server.
2. Novell ConsoleOne
3. PuTTY
4. WinSCP.
5. Syncsort Backup Express
6. DNS and DHCP Management Consoles
7. HP Insight Manager.
8. Other various utilities as installed on current server.
iii. Configure the iLO remote management interface. f. DR Server Disk Expansion – Add and configure an expansion cabinet and additional drives to server located at the Minneapolis field office.
i. Add a disk expansion cabinet.
ii. Add and configure additional disks.
iii. Expand or move existing virtual server to new disk space.
iv. Configure the iLO remote management interface.
v. Install and configure disk expansion for existing DR server on VMware ESX server.
vi. Partition and format storage for VMware ESX server.
vii. Transfer existing virtual machines to larger storage partitions. g. AD Domain Controller Installation – Add and configure second AD Domain Controller.
i. Install and configure Windows 2008 R2 apply any necessary patches.
ii. Install and configure a second AD Domain Controller.
iii. Implement roles and features as necessary to mirror existing AD Domain Controller.
iv. Install and configure DNS services.
v. Configure the iLO remote management interface.
vi. Configure and implement other services as determined in planning.h. VMware ESX Server Replacement – Replace the existing VMware ESX servers with new hardware.
i. Create an implementation plan for replacing existing VMware ESX servers.
ii. Install and configure new servers.
iii. Install, configure and patch VMware ESX / v sphere server.
iv. Configure the iLO remote management interface.
v. Coordinate the replacement of existing servers with newly configured servers.i. HP EVA Upgrade- Install additional disk drives and upgrade disk pool and software on current HP EVA.
i. Expand the EVA disk pool with new disk drives.
ii. Review and update all software as necessary.
iii. Review and upgrade all firmware as necessary.
iv. Install new disk drives and expand of the disk pool on the HP EVA.j. Novell ZCM Patch Management Implementation – Implement ZCM Patch Management for new hardware and virtual machines.
i. Configure ZCM Patch Management to work with new hardware and virtual machines.k. Novell ZCM Upgrade – Upgrade Novell ZCM 10.x to latest version.
i. Perform upgrade of Novell ZCM to latest version. l. General Support.
i. Provide up to 80 hours of support for network and connected equipment.
No comments:
Post a Comment